Upset bolt produced in carbon steel SAE 1045 hot dip galvanized according to ASTM A-153.
Menu
Contact Us: (267) 613 – 8087
salesusa@romagnole.com
salesusa@romagnole.com
Upset bolt produced in carbon steel SAE 1045 hot dip galvanized according to ASTM A-153.
Used in overhead power grid poles.
Technical and specific characteristics
Produced: Carbon Steel SAE 1045
Galvanized: Hot deep ASTM A-153
Provided: 02 square nuts, locknut, round washer and split pin
Standard: ANSI C-135.31
Others: Avaliable in single and double versions
| Dimension | A (in/mm) | B (in/mm) | C (in/mm) | Type | Thread | Code |
|---|---|---|---|---|---|---|
| 5/8″ x 10″ | 4.3/8″ (111) | 10″ (254) | 4″ (101.4) | Single | 5/8″ UNC – 11FPP | R-2344 1/2″ |
| 5/8″ x 12″ | 4.3/8″ (111) | 12″ (304.8) | 6″ (152.4) | Single | 5/8″ UNC – 11FPP | R-2346 1/2″ |
| 5/8″ x 14″ | 4.3/8″ (111) | 14″ (355.6) | 6″ (152.4) | Single | 5/8″ UNC – 11FPP | R-2348 1/2″ |
| 5/8″ x 10″ | 4.3/8″ (111) | 10″ (254) | 6″ (152.4) | Double | 5/8″ UNC – 11FPP | R-2396 |
| 5/8″ x 12″ | 4.3/8″ (111) | 12″ (304.8) | 6″ (152.4) | Double | 5/8″ UNC – 11FPP | R-2398 |
Eyelet oval type produced in carbon steel SAE 1020 – 1045 and hot dip galvanized according to ASTM A-153.
Anchor rod are buried in the ground to anchor the overhead power line, ensuring alignment and perfect installation.
Eyenut produced in carbon steel SAE 1010-1020, hot dip galvanized according to ASTM A-153.
For use in installations where safety, reliability and aesthetic aspects are required.
Machine bolt produced in carbon steel SAE 1010 – 1020, hot deep galvanized ASTM A -153
Carriage bolt produced in carbon steel SAE 1010 – 1020 hot dip galvanized according to ASTM A-153.
450 Beaver St, Unit 1036, North Wales, PA, 19454
salesusa@romagnole.com
+1 267-621-2572
