Double arming bolt produced in carbon steel SAE 1010-1020 na hot dip galvanized according to ASTM A-153.
Menu
Contact Us: (267) 613 – 8087
salesusa@romagnole.com
salesusa@romagnole.com
Double arming bolt produced in carbon steel SAE 1010-1020 na hot dip galvanized according to ASTM A-153.
Used in overhead power grid poles.
Technical and specific characteristics
Produced: Carbon Steel SAE 1010 – 1020
Galvanized: Hot deep ASTM A-153
Provided: 04 square nut and conic point
Standard: IEEE C – 135.1
| Dimension | A (in/mm) | B (in/mm) | C (Thread) | Code |
|---|---|---|---|---|
| 5/8″ x 10″ | 10″ (254) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8860 |
| 5/8″ x 12″ | 12″ (305) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8862 |
| 5/8″ x 14″ | 14″ (356) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8864 |
| 5/8″ x 16″ | 16″ (406) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8866 |
| 5/8″ x 18″ | 18″ (457) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8868 |
| 5/8″ x 20″ | 20″ (508) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8870 |
| 5/8″ x 22″ | 22″ (559) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8872 |
| 5/8″ x 24″ | 24″ (610) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8874 |
| 5/8″ x 26″ | 26″ (660) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8876 |
| 5/8″ x 28″ | 28″ (711) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8877 |
| 5/8″ x 30″ | 30″ (762) | 1/4″ (6.35) | 5/8″ UNC – 11FPP | R-8878 |
| 3/4″ x 12″ | 12″ (305) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8882 |
| 3/4″ x 14″ | 14″ (356) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8884 |
| 3/4″ x 16″ | 16″ (406) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8886 |
| 3/4″ x 18″ | 18″ (457) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8888 |
| 3/4″ x 20″ | 20″ (508) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8890 |
| 3/4″ x 22″ | 22″ (559) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8892 |
| 3/4″ x 24″ | 24″ (610) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8894 |
| 3/4″ x 26″ | 26″ (660) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8896 |
| 3/4″ x 28″ | 28″ (711) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8897 |
| 3/4″ x 30″ | 30″ (762) | 3/8″ (9.52) | 3/4″ UNC – 10FPP | R-8898 |
Single phase distribution transformers are designed to be used in urbar or rural distribution energy areas.
Nut produced in carbon steel SAE 1010-1020, hot dip galvanized according to ASTM A-153.
Washers produced in carbon steel SAE 1010-1020, hot dip galvanizad according ASTM A-153. Are part of the fastening system of all aerial overhead structures.
Machine bolt produced in carbon steel SAE 1010 – 1020, hot deep galvanized ASTM A -153
Anchor rod are buried in the ground to anchor the overhead power line, ensuring alignment and perfect installation.
Clevis produced in carbon steel SAE 1010-1020 laminated, hot dip galvanized according ASTM A-153.
441 Industrial Drive, North
Wales, PA, 19454
salesusa@romagnole.com
