Nut produced in carbon steel SAE 1010-1020, hot dip galvanized according to ASTM A-153.
Menu
Contact Us: (267) 613 – 8087
salesusa@romagnole.com
salesusa@romagnole.com
Nut produced in carbon steel SAE 1010-1020, hot dip galvanized according to ASTM A-153.
Used for anchoring devices on overhead network poles.
Technical and specific characteristics
Produced: Carbon Steel SAE 1010 – 1020
Galvanized: Hot deep ASTM A-153
Standard: IEEE C – 135.1
Others: Avaliable in lock nut and square nut type
| Dimension | A (in/mm) | B (in/mm) | C (in/mm) | Type | Code |
|---|---|---|---|---|---|
| 5/8″ | 5/8″ (15,87) | 1″ (25,4) | 35/64″ (13.98) | Square nut | R-8563 |
| 3/4″ | 3/4″ (19,05) | 1.1/8″ (28.57) | 39/64″ (16,565) | Square nut | R-8564 |
Nut produced in carbon steel SAE 1010-1020, hot dip galvanized according to ASTM A-153.
For use in installations where safety, reliability and aesthetic aspects are required.
Carriage bolt produced in carbon steel SAE 1010 – 1020 hot dip galvanized according to ASTM A-153.
Washers produced in carbon steel SAE 1010-1020, hot dip galvanizad according ASTM A-153. Are part of the fastening system of all aerial overhead structures.
Upset bolt produced in carbon steel SAE 1045 hot dip galvanized according to ASTM A-153.
Eyelet oval type produced in carbon steel SAE 1020 – 1045 and hot dip galvanized according to ASTM A-153.
450 Beaver St, Unit 1036, North Wales, PA, 19454
salesusa@romagnole.com
+1 267-621-2572
