Anchor rod are buried in the ground to anchor the overhead power line, ensuring alignment and perfect installation.
Menu
Contact Us: (267) 613 – 8087
salesusa@romagnole.com
salesusa@romagnole.com
Anchor rod are buried in the ground to anchor the overhead power line, ensuring alignment and perfect installation.
Used in overheads power networks, being buried in the ground and providing alignment and stability for the pole.
Technical and specific characteristics
Produced: Carbon Steel SAE 1010 – 1020
Galvanized: Hot deep ASTM A-153
Standard: ANSI/IEEE
| Dimension | A (in/mm) | B (in/mm) | C (Thread) | Tensile Test | Type | Code |
|---|---|---|---|---|---|---|
| 1″ x 96″ | 96″ (2438.4) | 4″ (101.6) | 5/8″ UNC 11 FPP | 16000 lbs | Heavy | R-5318 |
| 1″ x 120″ | 120″ (3048) | 4″ (101.6) | 3/4″ UNC 10 FPP | 20050 lbs | Light | R-7430 |
| 3/4″ x 96″ | 96″ (2438.4) | 4″ (101.6) | 3/4″ UNC 10 FPP | 23000 lbs | Heavy | R-7428 |
| 5/8″ x 84″ | 84″ (2133.6) | 4″ (101.6) | 5/8″ UNC 11 FPP | 16000 lbs | Heavy | R-5317 |
| 5/8″ x 72″ | 72″ (1828.8) | 4″ (101.6) | 5/8″ UNC 11 FPP | 16000 lbs | Heavy | R-5316 |
Upset bolt produced in carbon steel SAE 1045 hot dip galvanized according to ASTM A-153.
Eyelet Thimbleye angle type produced in carbon steel SAE 1020 – 1045 and hot dip galvanized according to ASTM A-153.
Eyelet oval type produced in carbon steel SAE 1020 – 1045 and hot dip galvanized according to ASTM A-153.
Oval eye bolt produced in carbon steel SAE 1010-1020, hot dip galvanized according ASTM A-153.
Washers produced in carbon steel SAE 1010-1020, hot dip galvanizad according ASTM A-153. Are part of the fastening system of all aerial overhead structures.
Anchor rod are buried in the ground to anchor the overhead power line, ensuring alignment and perfect installation.
450 Beaver St, Unit 1036, North Wales, PA, 19454
salesusa@romagnole.com
+1 267-621-2572
