Menu
Contact Us: (267) 613 – 8087
salesusa@romagnole.com
salesusa@romagnole.com
Romagnole single-phase transformers are designed and manufactured according to all applicable IEEE standards, from the general definitions and requirements to the test’s specifics. All transformers are oil-immersed (mineral ASTM D3487 Type II or FR3), 65°C temperature rise, designed for usual service conditions per IEEE C57.12.20.
Transformers are DOE 2016 compliant and have short-circuit impedances according to IEEE C57.12.20.
| kVA | High-Voltage | Low-Voltage |
| 25 | 12 470GrdY/7200 13 200GrdY/7620 13 800GrdY/7970 24 940GrdY/14 400 7200/12 470Y 7620/13 200Y 13 200/22 860Y 13 800/23 900Y |
120/240 277 240/480 |
| 37,5 | ||
| 50 | ||
| 75 | ||
| 100 | ||
| 167 |
| Accessory | Default Standard | Available |
|---|---|---|
| H.V. Bushings | Eyebolt Tin plated | |
| L.V. Bushings | Eyebolt/Spade Tin plated | |
| Ground connector | Eyebolt Ground connector | Vise type Ground connector |
| Pressure relief device | Pressure relief valve | Internal Fault Detector (IFD) |
| Animal Guard | None | H.V bushing animal guard, surge arrester animal guard |
| Surge Arrester | None | H.V/L.V bushing surge arrester |
| Markings | kVA decal, phases, NON-PCB label | |
| Taps | ± 2 x 2.5% DETC | None |
| Nameplate | Black laser etched anodized aluminum | Stainless steel, special information bar code, material stock code |
| Tank | Mild steel (Light Grey IEEE C57.12.20) |
Transformers are 100% tested according to routine tests described in IEEE C57.12.90.
Single phase distribution transformers are designed to be used in urbar or rural distribution energy areas.
Clevis produced in carbon steel SAE 1010-1020 laminated, hot dip galvanized according ASTM A-153.
For use in installations where safety, reliability and aesthetic aspects are required.
Anchor rod are buried in the ground to anchor the overhead power line, ensuring alignment and perfect installation.
Eyenut produced in carbon steel SAE 1010-1020, hot dip galvanized according to ASTM A-153.
Eyelet oval type produced in carbon steel SAE 1020 – 1045 and hot dip galvanized according to ASTM A-153.
450 Beaver St, Unit 1036, North Wales, PA, 19454
salesusa@romagnole.com
+1 267-621-2572
