salesusa@romagnole.com
Washers produced in carbon steel SAE 1010-1020, hot dip galvanizad according ASTM A-153. Are part of the fastening system of all aerial overhead structures.
Used in conventional grids as part of the system of fixing components to the poles of aerial grids.
Technical and specific characteristics
Produced: Carbon Steel SAE 1045
Galvanized: Hot deep ASTM A-153
| Dimension | A (in/mm) | B (in/mm) | C (in/mm) | Type | Code |
|---|---|---|---|---|---|
| SQUARE | 2.1/4″ (57,15) | 13/16″ (20,57) | 13/16″ (4,76) | Square | R-1076 |
| SQUARE | 3″ (76,2) | 13/16″ (20,57) | 3/16″ (4,76) | Square | R-1078 |
| SQUARE CURVED | 3″ (76,2) | 11/16″ (17.46) | 1/4″ (6.35) | Square curved | R-0113 |
| SQUARE CURVED | 3″ (76,2) | 13/16″ (20,57) | 1/4″ (6.35) | Square curved | R-6823 |
| ROUND | 1.34″ (44,4) | 11/16″ (17.46) | 1/8″ (3,17) | Round | R-1088 |
Thimbleye bolt produced in carbon steel SAE 1010-1020 na hot dip galvanized according to ASTM A-153.
Eyelet Thimbleye angle type produced in carbon steel SAE 1020 – 1045 and hot dip galvanized according to ASTM A-153.
Clevis produced in carbon steel SAE 1010-1020 laminated, hot dip galvanized according ASTM A-153.
Upset bolt produced in carbon steel SAE 1045 hot dip galvanized according to ASTM A-153.
For use in installations where safety, reliability and aesthetic aspects are required.
Line post studs produced in carbon steel SAE 1010-1020, got dip galvanized according to ASTM A-153.
450 Beaver St, Unit 1036, North Wales, PA, 19454
salesusa@romagnole.com
+1 267-621-2572
