Contate-nos: (267) 613 – 8087
salesusa@romagnole.com
salesusa@romagnole.com
Romagnole single-phase pad-mounted transformers are designed and manufactured according to all applicable IEEE standards, from the general definitions and requirements to the test’s specificities. All transformers are oil-immersed (mineral ASTM D3487 Type II or FR3), 65°C temperature rise, designed for usual service conditions per IEEE C57.12.38.
Transformers are DOE 2016 compliant and have short-circuit impedances according to IEEE C57.12.38.
| kVA | High-Voltage | Low-Voltage |
|---|---|---|
| 25 | 12 470 GrdY/7200 13 200 GrdY/7620 13 800 GrdY/7970 22 860 GrdY/13 200 23 900 GrdY/13 800 24 940 GrdY/14 400 |
240/120 480/240 |
| 50 | ||
| 75 | ||
| 100 |
| Accessory | Default Standard | Available |
|---|---|---|
| H.V. Fuse | Bay-O-net with drip-guard and ELSP | |
| Surge Arrester | None | |
| H.V. Bushings | Wells with fixed stud | Removable studs, inserts, integral bushings |
| L.V. Bushings | Secondary bushings provided threaded stud | Secondary terminals |
| Markings | kVA, H.V and L.V terminals stenciled, NON-PCB label | Warning / Danger labels |
| Taps | ± 2 x 2% DETC | None |
| Nameplate | Black laser etched anodized aluminum | Stainless steel, special information bar code, material stock code |
| Tank | Mild steel (Green IEEE C57.12.28) | |
| Fittings | Fill and drain plug, PRV, locking device, parking stand, eyebolt ground connector IEEE minimum | Vise type grounding connector, IFD, Load break switch |
| Front Panel |
Transformers are 100% tested according to routine tests described in IEEE C57.12.90.
Eyenut produced in carbon steel SAE 1010-1020, hot dip galvanized according to ASTM A-153.
Nut produced in carbon steel SAE 1010-1020, hot dip galvanized according to ASTM A-153.
Bracket pole top are supports for insulator accommodation, produced in carbon steel.
Pad mounted transformer to be used in urban energy areas and in commercial and indrustrial installations that requests characteristics as security, reliability and also esthetic.
Thimbleye bolt produced in carbon steel SAE 1010-1020 na hot dip galvanized according to ASTM A-153.
Clevis produced in carbon steel SAE 1010-1020 laminated, hot dip galvanized according ASTM A-153.